现在的攻击多数都是混合型的，而且CC攻击很多，防CC只能自己搞了，按照第一篇的配置，在实际的使用中效果并不理想。限制每秒钟的请求数和ip连接数，属于杀敌一千自损八百的做法。是可以防小规模的C++c攻击，但是不够灵活，限制严谨，误杀率很大；限制少了，当攻击的ip量达到一定规模的时候，传递到初始化的请求还是非常多，导致PHP撑不住挂掉。这里在上一篇的基础上详细介绍一下我在生产中使用的配置。
最大连接数不够的话，出现“打开文件过多”错误。系统放置的1024太小了，在/etc/security/limits.conf中增加：
* soft nproc 65535 * hard nproc 65535 * soft nofile 65535 * hard nofile 65535
这个比较考验内功，暂时还没太多研究，从网上搬运了一份，以后在慢慢学习：
### ### GENERAL SYSTEM SECURITY OPTIONS ### ### # Controls the System Request debugging functionality of the kernel kernel.sysrq = 0 # Controls whether core dumps will append the PID to the core filename. # Useful for debugging multi-threaded applications. kernel.core_uses_pid = 1 #Allow for more PIDs kernel.pid_max = 65535 # The contents of /proc/<pid>/maps and smaps files are only visible to # readers that are allowed to ptrace() the process kernel.maps_protect = 1 #Enable ExecShield protection kernel.exec-shield = 1 kernel.randomize_va_space = 2 # Controls the maximum size of a message, in bytes kernel.msgmnb = 65535 # Controls the default maxmimum size of a mesage queue kernel.msgmax = 65535 # Restrict core dumps fs.suid_dumpable = 0 # Hide exposed kernel pointers kernel.kptr_restrict = 1 ### ### IMPROVE SYSTEM MEMORY MANAGEMENT ### ### # Increase size of file handles and inode cache fs.file-max = 209708 # Do less swapping vm.swappiness = 30 vm.dirty_ratio = 30 vm.dirty_background_ratio = 5 # specifies the minimum virtual address that a process is allowed to mmap vm.mmap_min_addr = 4096 # 50% overcommitment of available memory vm.overcommit_ratio = 50 vm.overcommit_memory = 0 # Set maximum amount of memory allocated to shm to 256MB kernel.shmmax = 268435456 kernel.shmall = 268435456 # Keep at least 64MB of free RAM space available vm.min_free_kbytes = 65535 ### ### GENERAL NETWORK SECURITY OPTIONS ### ### #Prevent SYN attack, enable SYNcookies (they will kick-in when the max_syn_backlog reached) net.ipv4.tcp_syncookies = 1 net.ipv4.tcp_syn_retries = 2 net.ipv4.tcp_synack_retries = 2 net.ipv4.tcp_max_syn_backlog = 4096 # Disables packet forwarding net.ipv4.ip_forward = 0 net.ipv4.conf.all.forwarding = 0 net.ipv4.conf.default.forwarding = 0 net.ipv6.conf.all.forwarding = 0 net.ipv6.conf.default.forwarding = 0 # Disables IP source routing net.ipv4.conf.all.send_redirects = 0 net.ipv4.conf.default.send_redirects = 0 net.ipv4.conf.all.accept_source_route = 0 net.ipv4.conf.default.accept_source_route = 0 net.ipv6.conf.all.accept_source_route = 0 net.ipv6.conf.default.accept_source_route = 0 # Enable IP spoofing protection, turn on source route verification net.ipv4.conf.all.rp_filter = 1 net.ipv4.conf.default.rp_filter = 1 # Disable ICMP Redirect Acceptance net.ipv4.conf.all.accept_redirects = 0 net.ipv4.conf.default.accept_redirects = 0 net.ipv4.conf.all.secure_redirects = 0 net.ipv4.conf.default.secure_redirects = 0 net.ipv6.conf.all.accept_redirects = 0 net.ipv6.conf.default.accept_redirects = 0 # Enable Log Spoofed Packets, Source Routed Packets, Redirect Packets net.ipv4.conf.all.log_martians = 1 net.ipv4.conf.default.log_martians = 1 # Decrease the time default value for tcp_fin_timeout connection net.ipv4.tcp_fin_timeout = 7 # Decrease the time default value for connections to keep alive net.ipv4.tcp_keepalive_time = 300 net.ipv4.tcp_keepalive_probes = 5 net.ipv4.tcp_keepalive_intvl = 15 # Don't relay bootp net.ipv4.conf.all.bootp_relay = 0 # Don't proxy arp for anyone net.ipv4.conf.all.proxy_arp = 0 # Turn on the tcp_timestamps, accurate timestamp make TCP congestion control alGorithms work better net.ipv4.tcp_timestamps = 1 # Don't ignore directed pings net.ipv4.icmp_echo_ignore_all = 0 # Enable ignoring broadcasts request net.ipv4.icmp_echo_ignore_broadcasts = 1 # Enable bad error message Protection net.ipv4.icmp_ignore_bogus_error_responses = 1 # Allowed local port range net.ipv4.ip_local_port_range = 16384 65535 # Enable a fix for RFC1337 - time-wait assassination hazards in TCP net.ipv4.tcp_rfc1337 = 1 # Do not auto-configure IPv6 net.ipv6.conf.all.autoconf=0 net.ipv6.conf.all.accept_ra=0 net.ipv6.conf.default.autoconf=0 net.ipv6.conf.default.accept_ra=0 net.ipv6.conf.eth0.autoconf=0 net.ipv6.conf.eth0.accept_ra=0 ### ### TUNING NETWORK PERFORMANCE ### ### # For high-bandwidth low-latency networks, use 'htcp' congestion control # Do a 'modprobe tcp_htcp' first net.ipv4.tcp_congestion_control = htcp # For servers with tcp-heavy workloads, enable 'fq' queue management scheduler (kernel > 3.12) net.core.default_qdisc = fq # Turn on the tcp_window_scaling net.ipv4.tcp_window_scaling = 1 # Increase the read-buffer space allocatable net.ipv4.tcp_rmem = 8192 87380 16777216 net.ipv4.udp_rmem_min = 16384 net.core.rmem_default = 262144 net.core.rmem_max = 16777216 # Increase the write-buffer-space allocatable net.ipv4.tcp_wmem = 8192 65536 16777216 net.ipv4.udp_wmem_min = 16384 net.core.wmem_default = 262144 net.core.wmem_max = 16777216 # Increase number of incoming connections net.core.somaxconn = 32768 # Increase number of incoming connections backlog net.core.netdev_max_backlog = 16384 net.core.dev_weight = 64 # Increase the maximum amount of option memory buffers net.core.optmem_max = 65535 # Increase the tcp-time-wait buckets pool size to prevent simple DOS attacks net.ipv4.tcp_max_tw_buckets = 1440000 # try to reuse time-wait connections, but don't recycle them (recycle can break clients behind NAT) net.ipv4.tcp_tw_recycle = 0 net.ipv4.tcp_tw_reuse = 1 # Limit number of orphans, each orphan can eat up to 16M (max wmem) of unswappable memory net.ipv4.tcp_max_orphans = 16384 net.ipv4.tcp_orphan_retries = 0 # Increase the maximum memory used to reassemble IP fragments net.ipv4.ipfrag_high_thresh = 512000 net.ipv4.ipfrag_low_thresh = 446464 # don't cache ssthresh from previous connection net.ipv4.tcp_no_metrics_save = 1 net.ipv4.tcp_moderate_rcvbuf = 1 # Increase size of RPC datagram queue length net.unix.max_dgram_qlen = 50 # Don't allow the arp table to become bigger than this net.ipv4.neigh.default.gc_thresh3 = 2048 # Tell the gc when to become aggressive with arp table cleaning. # Adjust this based on size of the LAN. 1024 is suitable for most /24 networks net.ipv4.neigh.default.gc_thresh2 = 1024 # Adjust where the gc will leave arp table alone - set to 32. net.ipv4.neigh.default.gc_thresh1 = 32 # Adjust to arp table gc to clean-up more often net.ipv4.neigh.default.gc_interval = 30 # Increase TCP queue length net.ipv4.neigh.default.proxy_qlen = 96 net.ipv4.neigh.default.unres_qlen = 6 # Enable Explicit Congestion Notification (RFC 3168), disable it if it doesn't work for you net.ipv4.tcp_ecn = 1 net.ipv4.tcp_reordering = 3 # How many times to retry killing an alive TCP connection net.ipv4.tcp_retries2 = 15 net.ipv4.tcp_retries1 = 3 # Avoid falling back to slow start after a connection goes idle # keeps our cwnd large with the keep alive connections (kernel > 3.6) net.ipv4.tcp_slow_start_after_idle = 0 # Allow the TCP fastopen flag to be used, beware some firewalls do not like TFO! (kernel > 3.7) net.ipv4.tcp_fastopen = 3 # This will enusre that immediatly subsequent connections use the new values net.ipv4.route.flush = 1 net.ipv6.route.flush = 1 # 具体值根据服务器硬件计算，配置不当可能导致过早关闭TCP连接 # net.netfilter.nf_conntrack_max = 1048576 # net.netfilter.nf_conntrack_tcp_timeout_established = 1200
参考了opencdn团队的做法，通过nginx和lua来防御cc，原理见下面的参考文章，效果很好
nginx需要编译lua模块
在nginx.conf的http段中加入：
limit_req_zone $cookie_token zone=session_limit:20m rate=1r/s; limit_req_zone $binary_remote_addr $uri zone=auth_limit:20m rate=1r/m;
在服务器段中加入：
location / {
limit_req zone=session_limit burst=5;
rewrite_by_lua '
local random = ngx.var.cookie_random
if (random == nil) then
return ngx.redirect("/auth?url=" .. ngx.var.request_uri)
end
local token = ngx.md5("opencdn" .. ngx.var.remote_addr .. random)
if (ngx.var.cookie_token ~= token) then
return ngx.redirect("/auth?url=".. ngx.var.request_uri)
end
';
proxy_redirect off;
proxy_set_header Host $host;
proxy_set_header X-Real-IP $remote_addr;
proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
proxy_pass http://backend;
}
location /auth {
limit_req zone=auth_limit burst=1;
if ($arg_url = "") {
return 403;
}
access_by_lua '
local random = math.random(9999)
local token = ngx.md5("opencdn" .. ngx.var.remote_addr .. random)
if (ngx.var.cookie_token ~= token) then
ngx.header["Set-Cookie"] = {"token=" .. token, "random=" .. random}
return ngx.redirect(ngx.var.arg_url)
end
';
}这个方法会造成搜索引擎蜘蛛一直处在302中，不利于seo，可以通过智能dns来为蜘蛛指定单独的线路。和被打到停机机比起来，seo几乎可以无视
通过上述的配置，cc攻击流量就处在302中了，但是保险起见对ip进行连接频率和并发限制，限制单ip连接和频率，在/ etc / sysconfig / iptables中加入：
#单个IP在60秒内只允许新建20个连接 -A INPUT -i eth0 -p tcp -m tcp --dport 80 -m state --state NEW -m recent --update --seconds 60 --hitcount 20 --name DEFAULT --rsource -j DROP -A INPUT -i eth0 -p tcp -m tcp --dport 80 -m state --state NEW -m recent --set --name DEFAULT --rsource #控制单个IP的最大并发连接数为20 -I INPUT -p tcp --dport 80 -m connlimit --connlimit-above 20 -j REJECT #每个IP最多20个初始连接 -A INPUT -p tcp --syn -m connlimit --connlimit-above 20 -j DROP
这样配置后，个别ip能建立的连接不是只有20个，具体能建立多少连接还要看tcp的超时设置，但唯一ip不会建立大量的tcp连接消耗系统资源
通过上面的设置nginx后，cc攻击请求转换302，直接由性能强大的nginx处理。但是攻击ip还是在不停的访问服务器，消耗着服务器的资源，一旦达到一定数量级，也会严重影响到系统的性能，所以通过分析nginx的访问日志彻底屏蔽这些ip
安装fail2ban并升级iptables至最新：
yum install -y epel-release yum install -y fail2ban iptables Python-inotify
先看下我nginx的访问日志格式：
log_format main '$remote_addr $status $request $body_bytes_sent [$time_local] $http_user_agent $http_referer $http_x_forwarded_for $upstream_addr $upstream_status $upstream_cache_status $upstream_response_time';
攻击日志的效果：
159.138.198.106 302 GET /auth?url=/ HTTP/1.1 235 [17/Oct/2015:21:06:22 +0800] Mozilla/5.0 (Macintosh; Intel Mac OS X 10_10_2) AppleWebKit/600.4.10 (KHTML, like Gecko) Version/8.0.4 Safari/600.4.10 - - - - - -
cc攻击的ip会经过nginx和lua处理后，访问状态转换302，根据nginx的访问日志格式，过滤这些ip和302状态，加入黑名单即可。
新建fail2ban的规则文件/ etc / fail2ban / filter。 d / nginx-302-cc.conf，内容为：
[Definition] failregex = <HOST> 302.(GET|POST)*.*HTTP/1.*$ ignoreregex =
新建fail2ban的配置文件/etc/fail2ban/jail.d/nginx-anti-302.conf，内容为：
[nginx-anti-302] enabled = true port = http filter = nginx-302-cc logpath = /opt/nginx/logs/52os.net/access_web.log findtime = 60 #检测60秒内的日志 bantime = 900 #屏蔽ip的时间为15分钟 maxretry = 90 #达到90次就屏蔽 backend = pyinotify #使用pyinotify检测日志变化，被攻击时检测海量日志时性能最好 banaction = iptables-ipset-proto6-allports #使用ipset屏蔽IP，使用iptables屏蔽大量IP需要时非常慢，并且资源占用非常大
访客访问一次网站会产生2次302，这样配置后60秒内允许45次正常的访问，基本上不会屏蔽正常访客
如果使用iptables屏蔽，需注意fail2ban-0.9.3在执行iptables命令时，会加上了-w参数防止规则冲突，iptables-1.4.20之后才有这个参数，而CentOS 6的iptables是1.4.7，导致iptables规则添加失败，解决方法是删除iptables-common.conf中的<lockinGopt>：
### ### GENERAL SYSTEM SECURITY OPTIONS ### ### # Controls the System Request debugging functionality of the kernel kernel.sysrq = 0 # Controls whether core dumps will append the PID to the core filename. # Useful for debugging multi-threaded applications. kernel.core_uses_pid = 1 #Allow for more PIDs kernel.pid_max = 65535 # The contents of /proc/<pid>/maps and smaps files are only visible to # readers that are allowed to ptrace() the process kernel.maps_protect = 1 #Enable ExecShield protection kernel.exec-shield = 1 kernel.randomize_va_space = 2 # Controls the maximum size of a message, in bytes kernel.msgmnb = 65535 # Controls the default maxmimum size of a mesage queue kernel.msgmax = 65535 # Restrict core dumps fs.suid_dumpable = 0 # Hide exposed kernel pointers kernel.kptr_restrict = 1 ### ### IMPROVE SYSTEM MEMORY MANAGEMENT ### ### # Increase size of file handles and inode cache fs.file-max = 209708 # Do less swapping vm.swappiness = 30 vm.dirty_ratio = 30 vm.dirty_background_ratio = 5 # specifies the minimum virtual address that a process is allowed to mmap vm.mmap_min_addr = 4096 # 50% overcommitment of available memory vm.overcommit_ratio = 50 vm.overcommit_memory = 0 # Set maximum amount of memory allocated to shm to 256MB kernel.shmmax = 268435456 kernel.shmall = 268435456 # Keep at least 64MB of free RAM space available vm.min_free_kbytes = 65535 ### ### GENERAL NETWORK SECURITY OPTIONS ### ### #Prevent SYN attack, enable SYNcookies (they will kick-in when the max_syn_backlog reached) net.ipv4.tcp_syncookies = 1 net.ipv4.tcp_syn_retries = 2 net.ipv4.tcp_synack_retries = 2 net.ipv4.tcp_max_syn_backlog = 4096 # Disables packet forwarding net.ipv4.ip_forward = 0 net.ipv4.conf.all.forwarding = 0 net.ipv4.conf.default.forwarding = 0 net.ipv6.conf.all.forwarding = 0 net.ipv6.conf.default.forwarding = 0 # Disables IP source routing net.ipv4.conf.all.send_redirects = 0 net.ipv4.conf.default.send_redirects = 0 net.ipv4.conf.all.accept_source_route = 0 net.ipv4.conf.default.accept_source_route = 0 net.ipv6.conf.all.accept_source_route = 0 net.ipv6.conf.default.accept_source_route = 0 # Enable IP spoofing protection, turn on source route verification net.ipv4.conf.all.rp_filter = 1 net.ipv4.conf.default.rp_filter = 1 # Disable ICMP Redirect Acceptance net.ipv4.conf.all.accept_redirects = 0 net.ipv4.conf.default.accept_redirects = 0 net.ipv4.conf.all.secure_redirects = 0 net.ipv4.conf.default.secure_redirects = 0 net.ipv6.conf.all.accept_redirects = 0 net.ipv6.conf.default.accept_redirects = 0 # Enable Log Spoofed Packets, Source Routed Packets, Redirect Packets net.ipv4.conf.all.log_martians = 1 net.ipv4.conf.default.log_martians = 1 # Decrease the time default value for tcp_fin_timeout connection net.ipv4.tcp_fin_timeout = 7 # Decrease the time default value for connections to keep alive net.ipv4.tcp_keepalive_time = 300 net.ipv4.tcp_keepalive_probes = 5 net.ipv4.tcp_keepalive_intvl = 15 # Don't relay bootp net.ipv4.conf.all.bootp_relay = 0 # Don't proxy arp for anyone net.ipv4.conf.all.proxy_arp = 0 # Turn on the tcp_timestamps, accurate timestamp make TCP congestion control alGorithms work better net.ipv4.tcp_timestamps = 1 # Don't ignore directed pings net.ipv4.icmp_echo_ignore_all = 0 # Enable ignoring broadcasts request net.ipv4.icmp_echo_ignore_broadcasts = 1 # Enable bad error message Protection net.ipv4.icmp_ignore_bogus_error_responses = 1 # Allowed local port range net.ipv4.ip_local_port_range = 16384 65535 # Enable a fix for RFC1337 - time-wait assassination hazards in TCP net.ipv4.tcp_rfc1337 = 1 # Do not auto-configure IPv6 net.ipv6.conf.all.autoconf=0 net.ipv6.conf.all.accept_ra=0 net.ipv6.conf.default.autoconf=0 net.ipv6.conf.default.accept_ra=0 net.ipv6.conf.eth0.autoconf=0 net.ipv6.conf.eth0.accept_ra=0 ### ### TUNING NETWORK PERFORMANCE ### ### # For high-bandwidth low-latency networks, use 'htcp' congestion control # Do a 'modprobe tcp_htcp' first net.ipv4.tcp_congestion_control = htcp # For servers with tcp-heavy workloads, enable 'fq' queue management scheduler (kernel > 3.12) net.core.default_qdisc = fq # Turn on the tcp_window_scaling net.ipv4.tcp_window_scaling = 1 # Increase the read-buffer space allocatable net.ipv4.tcp_rmem = 8192 87380 16777216 net.ipv4.udp_rmem_min = 16384 net.core.rmem_default = 262144 net.core.rmem_max = 16777216 # Increase the write-buffer-space allocatable net.ipv4.tcp_wmem = 8192 65536 16777216 net.ipv4.udp_wmem_min = 16384 net.core.wmem_default = 262144 net.core.wmem_max = 16777216 # Increase number of incoming connections net.core.somaxconn = 32768 # Increase number of incoming connections backlog net.core.netdev_max_backlog = 16384 net.core.dev_weight = 64 # Increase the maximum amount of option memory buffers net.core.optmem_max = 65535 # Increase the tcp-time-wait buckets pool size to prevent simple DOS attacks net.ipv4.tcp_max_tw_buckets = 1440000 # try to reuse time-wait connections, but don't recycle them (recycle can break clients behind NAT) net.ipv4.tcp_tw_recycle = 0 net.ipv4.tcp_tw_reuse = 1 # Limit number of orphans, each orphan can eat up to 16M (max wmem) of unswappable memory net.ipv4.tcp_max_orphans = 16384 net.ipv4.tcp_orphan_retries = 0 # Increase the maximum memory used to reassemble IP fragments net.ipv4.ipfrag_high_thresh = 512000 net.ipv4.ipfrag_low_thresh = 446464 # don't cache ssthresh from previous connection net.ipv4.tcp_no_metrics_save = 1 net.ipv4.tcp_moderate_rcvbuf = 1 # Increase size of RPC datagram queue length net.unix.max_dgram_qlen = 50 # Don't allow the arp table to become bigger than this net.ipv4.neigh.default.gc_thresh3 = 2048 # Tell the gc when to become aggressive with arp table cleaning. # Adjust this based on size of the LAN. 1024 is suitable for most /24 networks net.ipv4.neigh.default.gc_thresh2 = 1024 # Adjust where the gc will leave arp table alone - set to 32. net.ipv4.neigh.default.gc_thresh1 = 32 # Adjust to arp table gc to clean-up more often net.ipv4.neigh.default.gc_interval = 30 # Increase TCP queue length net.ipv4.neigh.default.proxy_qlen = 96 net.ipv4.neigh.default.unres_qlen = 6 # Enable Explicit Congestion Notification (RFC 3168), disable it if it doesn't work for you net.ipv4.tcp_ecn = 1 net.ipv4.tcp_reordering = 3 # How many times to retry killing an alive TCP connection net.ipv4.tcp_retries2 = 15 net.ipv4.tcp_retries1 = 3 # Avoid falling back to slow start after a connection goes idle # keeps our cwnd large with the keep alive connections (kernel > 3.6) net.ipv4.tcp_slow_start_after_idle = 0 # Allow the TCP fastopen flag to be used, beware some firewalls do not like TFO! (kernel > 3.7) net.ipv4.tcp_fastopen = 3 # This will enusre that immediatly subsequent connections use the new values net.ipv4.route.flush = 1 net.ipv6.route.flush = 1 # 具体值根据服务器硬件计算，配置不当可能导致过早关闭TCP连接 # net.netfilter.nf_conntrack_max = 1048576 # net.netfilter.nf_conntrack_tcp_timeout_established = 12000
启动fail2ban：
### ### GENERAL SYSTEM SECURITY OPTIONS ### ### # Controls the System Request debugging functionality of the kernel kernel.sysrq = 0 # Controls whether core dumps will append the PID to the core filename. # Useful for debugging multi-threaded applications. kernel.core_uses_pid = 1 #Allow for more PIDs kernel.pid_max = 65535 # The contents of /proc/<pid>/maps and smaps files are only visible to # readers that are allowed to ptrace() the process kernel.maps_protect = 1 #Enable ExecShield protection kernel.exec-shield = 1 kernel.randomize_va_space = 2 # Controls the maximum size of a message, in bytes kernel.msgmnb = 65535 # Controls the default maxmimum size of a mesage queue kernel.msgmax = 65535 # Restrict core dumps fs.suid_dumpable = 0 # Hide exposed kernel pointers kernel.kptr_restrict = 1 ### ### IMPROVE SYSTEM MEMORY MANAGEMENT ### ### # Increase size of file handles and inode cache fs.file-max = 209708 # Do less swapping vm.swappiness = 30 vm.dirty_ratio = 30 vm.dirty_background_ratio = 5 # specifies the minimum virtual address that a process is allowed to mmap vm.mmap_min_addr = 4096 # 50% overcommitment of available memory vm.overcommit_ratio = 50 vm.overcommit_memory = 0 # Set maximum amount of memory allocated to shm to 256MB kernel.shmmax = 268435456 kernel.shmall = 268435456 # Keep at least 64MB of free RAM space available vm.min_free_kbytes = 65535 ### ### GENERAL NETWORK SECURITY OPTIONS ### ### #Prevent SYN attack, enable SYNcookies (they will kick-in when the max_syn_backlog reached) net.ipv4.tcp_syncookies = 1 net.ipv4.tcp_syn_retries = 2 net.ipv4.tcp_synack_retries = 2 net.ipv4.tcp_max_syn_backlog = 4096 # Disables packet forwarding net.ipv4.ip_forward = 0 net.ipv4.conf.all.forwarding = 0 net.ipv4.conf.default.forwarding = 0 net.ipv6.conf.all.forwarding = 0 net.ipv6.conf.default.forwarding = 0 # Disables IP source routing net.ipv4.conf.all.send_redirects = 0 net.ipv4.conf.default.send_redirects = 0 net.ipv4.conf.all.accept_source_route = 0 net.ipv4.conf.default.accept_source_route = 0 net.ipv6.conf.all.accept_source_route = 0 net.ipv6.conf.default.accept_source_route = 0 # Enable IP spoofing protection, turn on source route verification net.ipv4.conf.all.rp_filter = 1 net.ipv4.conf.default.rp_filter = 1 # Disable ICMP Redirect Acceptance net.ipv4.conf.all.accept_redirects = 0 net.ipv4.conf.default.accept_redirects = 0 net.ipv4.conf.all.secure_redirects = 0 net.ipv4.conf.default.secure_redirects = 0 net.ipv6.conf.all.accept_redirects = 0 net.ipv6.conf.default.accept_redirects = 0 # Enable Log Spoofed Packets, Source Routed Packets, Redirect Packets net.ipv4.conf.all.log_martians = 1 net.ipv4.conf.default.log_martians = 1 # Decrease the time default value for tcp_fin_timeout connection net.ipv4.tcp_fin_timeout = 7 # Decrease the time default value for connections to keep alive net.ipv4.tcp_keepalive_time = 300 net.ipv4.tcp_keepalive_probes = 5 net.ipv4.tcp_keepalive_intvl = 15 # Don't relay bootp net.ipv4.conf.all.bootp_relay = 0 # Don't proxy arp for anyone net.ipv4.conf.all.proxy_arp = 0 # Turn on the tcp_timestamps, accurate timestamp make TCP congestion control alGorithms work better net.ipv4.tcp_timestamps = 1 # Don't ignore directed pings net.ipv4.icmp_echo_ignore_all = 0 # Enable ignoring broadcasts request net.ipv4.icmp_echo_ignore_broadcasts = 1 # Enable bad error message Protection net.ipv4.icmp_ignore_bogus_error_responses = 1 # Allowed local port range net.ipv4.ip_local_port_range = 16384 65535 # Enable a fix for RFC1337 - time-wait assassination hazards in TCP net.ipv4.tcp_rfc1337 = 1 # Do not auto-configure IPv6 net.ipv6.conf.all.autoconf=0 net.ipv6.conf.all.accept_ra=0 net.ipv6.conf.default.autoconf=0 net.ipv6.conf.default.accept_ra=0 net.ipv6.conf.eth0.autoconf=0 net.ipv6.conf.eth0.accept_ra=0 ### ### TUNING NETWORK PERFORMANCE ### ### # For high-bandwidth low-latency networks, use 'htcp' congestion control # Do a 'modprobe tcp_htcp' first net.ipv4.tcp_congestion_control = htcp # For servers with tcp-heavy workloads, enable 'fq' queue management scheduler (kernel > 3.12) net.core.default_qdisc = fq # Turn on the tcp_window_scaling net.ipv4.tcp_window_scaling = 1 # Increase the read-buffer space allocatable net.ipv4.tcp_rmem = 8192 87380 16777216 net.ipv4.udp_rmem_min = 16384 net.core.rmem_default = 262144 net.core.rmem_max = 16777216 # Increase the write-buffer-space allocatable net.ipv4.tcp_wmem = 8192 65536 16777216 net.ipv4.udp_wmem_min = 16384 net.core.wmem_default = 262144 net.core.wmem_max = 16777216 # Increase number of incoming connections net.core.somaxconn = 32768 # Increase number of incoming connections backlog net.core.netdev_max_backlog = 16384 net.core.dev_weight = 64 # Increase the maximum amount of option memory buffers net.core.optmem_max = 65535 # Increase the tcp-time-wait buckets pool size to prevent simple DOS attacks net.ipv4.tcp_max_tw_buckets = 1440000 # try to reuse time-wait connections, but don't recycle them (recycle can break clients behind NAT) net.ipv4.tcp_tw_recycle = 0 net.ipv4.tcp_tw_reuse = 1 # Limit number of orphans, each orphan can eat up to 16M (max wmem) of unswappable memory net.ipv4.tcp_max_orphans = 16384 net.ipv4.tcp_orphan_retries = 0 # Increase the maximum memory used to reassemble IP fragments net.ipv4.ipfrag_high_thresh = 512000 net.ipv4.ipfrag_low_thresh = 446464 # don't cache ssthresh from previous connection net.ipv4.tcp_no_metrics_save = 1 net.ipv4.tcp_moderate_rcvbuf = 1 # Increase size of RPC datagram queue length net.unix.max_dgram_qlen = 50 # Don't allow the arp table to become bigger than this net.ipv4.neigh.default.gc_thresh3 = 2048 # Tell the gc when to become aggressive with arp table cleaning. # Adjust this based on size of the LAN. 1024 is suitable for most /24 networks net.ipv4.neigh.default.gc_thresh2 = 1024 # Adjust where the gc will leave arp table alone - set to 32. net.ipv4.neigh.default.gc_thresh1 = 32 # Adjust to arp table gc to clean-up more often net.ipv4.neigh.default.gc_interval = 30 # Increase TCP queue length net.ipv4.neigh.default.proxy_qlen = 96 net.ipv4.neigh.default.unres_qlen = 6 # Enable Explicit Congestion Notification (RFC 3168), disable it if it doesn't work for you net.ipv4.tcp_ecn = 1 net.ipv4.tcp_reordering = 3 # How many times to retry killing an alive TCP connection net.ipv4.tcp_retries2 = 15 net.ipv4.tcp_retries1 = 3 # Avoid falling back to slow start after a connection goes idle # keeps our cwnd large with the keep alive connections (kernel > 3.6) net.ipv4.tcp_slow_start_after_idle = 0 # Allow the TCP fastopen flag to be used, beware some firewalls do not like TFO! (kernel > 3.7) net.ipv4.tcp_fastopen = 3 # This will enusre that immediatly subsequent connections use the new values net.ipv4.route.flush = 1 net.ipv6.route.flush = 1 # 具体值根据服务器硬件计算，配置不当可能导致过早关闭TCP连接 # net.netfilter.nf_conntrack_max = 1048576 # net.netfilter.nf_conntrack_tcp_timeout_established = 12001
通过以上设置实现了：
发达了系统的腐败
cc流量直接由高性能的nginx返回302，不会proxy_pass到放置的服务器或应用
限制级别ip建立的tcp连接数量和频率
恶意攻击ip实时黑名单